Here are some aerial drone video shots that I took while we were doing a camping trip down the California coast. These are from a beautiful place called Morro Bay. The waves were really cool, and there is this iconic rock formation right on the coastline.

Follow through to check out my video on the Big Sur coastline!

I’m remodeling my kitchen and building new cabinets out of alder wood. I like to remember what I did, so I’ll write up some details for the next wood working project I tackle. The first... [read more]

This page is specifically for the Epoxy resin ideas & advice group. The admin’s don’t want affiliate links, so I removed them. For more complete product links and more detailed info visit my other post: epoxy manufacturers and... [read more]

Trout farming in my living room - click through for the video!

Click through to watch the video.

I recently got a used Lance truck camper to be put on my 2012 F250 long bed truck. The F-250 has it’s backup camera in the tailgate and puts the display inside the mirror. The... [read more]

Orangutan IPA by Redwood Monkey Brewing West Coast IPA All Grain Recipe This is an awesome beer and I want to share it with everyone! It is my take on a classic West Coast IPA,... [read more]

Check out this video of us brewing beer in my garage.

Hey everyone! I'm experimenting with drone footage. I can't wait to combine it with Cyr wheel and unicycling. This is my first mini-short from the drone, called "Tahoe Air".

Hey guys! In this "adventures of Corbin" episode I'm using my Alaskan Mill to make my own oak wood slabs! Check it out in case you are interested in doing it yourself, as I go over the basics on what I did. A pretty large oak tree fell down on my property last summer, and I wanted to see if I could get some usable wood of it. This is my second time using an alaskan mill, and it is a lot of hard work, but good fun. If you liked the video, subscribe! It encourages me to make more cool films.

New Mexico Horizons! We visited Taos, New Mexico for a ski/snowboard trip, but there wasn't much snow. We did an awesome hike around the nearby areas and I took some photos. I’m still working on composition and trying to get lines to be a little more pleasing.

I like automated vacuum cleaners. They keep the house looking tidy with minimal effort. Roomba vacuums are the quite popular and have been around for a long time, but they aren’t too smart and do a... [read more]

I took this when visiting New Mexico's Ghost Ranch.

Ghost Ranch White Sheep   I’m not super thrilled with the subject’s in this photo; the black and white baby sheep looks out of place and a bit awkward, and I captured a bit of... [read more]

The Ghost Ranch Green Tree. Well, I'm not really sure of that trees name, but it was pretty green compared to a lot of everything else around. The Ghost Ranch is in New Mexico, and inspired the artist Georgia O'Keeffe.

I visited Taos, New Mexico to do some snowboarding, but there wasn’t much snow. So, one day we drove out to the Ghost Ranch, a few hours away, and I snapped a few pictures. This area inspired Georgia O’Keeffe, and it is easy to see why! Click through to see the photo larger...

Camera: http://amzn.to/2pc3vWS I was on my way to go snowboarding in Kirkwood and stopped by the airport to grab this shot.

March 2018 Camera: http://amzn.to/2p9gGsq

Part 3 of our Arizona Trail unicycle adventure. This was some amazing scenery.

Part two of my Arizona Trail adventure!

Blue Hawaii Sunsets - taken in Lahaina when I was doing an extended stay in Maui.

My introductory video about the April 2017 adventure of riding the Arizona Trail on my unicycle.

  Down by the river off of East Zayante Road in the Santa Cruz mountains is an old VW bug that is slowly rotting away. 

Electric Mini Boat! My friend Josh at rapid whale came up with this awesome mini boat powered by a 12v battery. Check out more details on his Mini Boat page.

My wife requested one thing for Christmas: a custom made jewelry rack. Originally I was thinking of welding something together out of old gears and sprockets, but the power went out right when I was... [read more]

The 110v motor on my SouthBend 13” tool room lathe from the 1950’s is slowly dying. It stalls a lot, and I’m forced to take really light cuts, even in aluminum. It slowly decreases speed... [read more]

Part 1 discussed why you should not be doing code reviews. Part 2: When to do code reviews and how to not do them. If you are creating mission critical code, then by all means: have... [read more]

You probably don’t need to be doing code reviews. Have confidence in the code you write, and understand it well. Click through to read all the details on why.

Some ramblings about where to go crabbing off Moss Landing in a sailboat, and the equipment I use.

The electric bug constantly has stuff going wrong with it. I got it back on the road and registered as a salvage vehicle. I could finally drive it to work again, but I’m a bit... [read more]