Here’s a few pictures that go with my last video and post: My previous KH26 handlebar that I had made:   Older handlebars:     Post modifications, and experimenting with strapping a tent under it:... [read more]

I’ve been making custom unicycle handlebars for over 10 years. I’ve refined the shape quite a bit over the years and I always have been tending to go wider and wider, and more mountain bike... [read more]

I’m in the process of preparing for my next big trip: The Arizona Trail on Unicycle. The Arizona Trail splits the state almost in half with an 800 mile vertical line from Mexico all the way... [read more]

I took this picture back in April of 2015 when I was in Nepal on a unicycle tour through the Annapurna mountain range.  Vendors with portable shops would setup their items to sell alongside the... [read more]

Late last year, Lexi told me that she wanted to go to Japan. I’ve always wanted to go to Japan and I figured this would be an awesome opportunity for me to go check out... [read more]

Back in October 2016 my electric VW bug was rear ended: http://www.corbinstreehouse.com/blog/2016/10/plug-bug-the-bug-is-squished-i-was-rear-ended/ I was super sad, and I’ve had to deal with the insurance side of things. In the end, the bug has been declared... [read more]

In October 2016 I got a wooden kayak kit. In February 2017 it finally hit the water! It took a little longer than I expected, but I’m happy with the result! Here I am taking... [read more]

Happy days are here! Actually, most all my days are happy days, but the kayak is done! I installed the seat and hatch straps. The seat is just some foam glued in, and in the... [read more]

I did some wet sanding on the kayak after the first coat. The directions say to use 400 grit, but I wet sanded the first two coats with 320, and then switched to 400 for... [read more]

I was gone for a few weeks in Japan, so progress on the kayak has been slow. I’m back to doing some work on it. First I had to sand it a ton. 80 grit,... [read more]

More horse photos! This photo was also taken when I was going through Spain heading from Barcelona up to San Sebastian with a few friends last summer. We touched through France, and I’m pretty sure... [read more]

I ran around with my tripod taking tons of pictures of the horses on a windy hilltop in France last summer. I used  Photomatix to generate this picture by combining five different exposures.     Use Photomatix! I... [read more]

I used to not really like hiking. There seemed to be no purpose to it; you followed a trail for no real rhyme or reason and usually ended up back where you started. I never... [read more]

   

Okay! Progress is happening when I have spare time. I glued on the cowling around the opening, cut it to fit and sanded it smooth. The glue-up was a bit tricky…I didn’t have quite enough... [read more]

 

I used 4oz fiberglass on top, per the instructions in the kit. I was afraid I was going to run out of epoxy hardener, so I only glassed half of the boat at first. This... [read more]

I’ve been busy having fun doing other things, so the kayak progress isn’t too fast. Yesterday I finished rounding off the corners of the top, and sanded through all the grits from 80 on up... [read more]

The next big step in the kayak was to glue the top on. First you put a coat of unthickened epoxy on the bottom side of the top piece, and then use thickened (cab-o-sil) epoxy... [read more]

Half Dome from Cloud’s Rest, Yosemite, California     A grueling 9 mile hike from Yosemite Valley that is relentlessly straight up!   

The next step in my kayak building journey was to plane the end clamps. These need a specific radius that changes depending on where you are along the top of the boat. The kit includes... [read more]

The next big step is to glass the hull bottom. I sanded down the putty with 80 grit, and then went through all the grades all over the kayak: 100/120/150/220.   You then cover it with... [read more]

Cloud’s Rest in Yosemite, California. You hike from the Valley floor at just shy of 4,000’ up to 9,931’.       

The kayak is still moving along! I’ve been a bit busy enjoying the outdoors: mountain biking (yeah on two wheels!), camping, and rock climbing.  The next part was to glass the interior middle section; there... [read more]

It’s a sad day in electric-ville. I was driving the electric bug to work at about 6:45 am on Highway 85, trying to enjoy my morning commute by working on learning some Japanese words for... [read more]

The kayak is starting to look like a real boat! First you have to level it, propped up on some sticks/sawhorses:   Then install the bulkheads:      And finally, start gluing it together with... [read more]

I got to the stitching part of the “stitch and glue” kayak build! It didn’t take very long….the kit was easy to work with.  I had to push my tablesaw off to the side to... [read more]

The kit came about a week after I ordered it. The delivery company received it in SFO, and was reluctant to deliver it to me right away — they wanted to wait an extra week... [read more]

I’ve been wanting to build my own kayak for quite a while. Ideally I want to make a strip-style kayak; something out of locally sourced redwood would be awesome! For now, I decided to start... [read more]

I needed a rack for my Tesla Model S; shoving a mountain bike along with a few unicycles in the back just wasn’t cutting it. Plus, in the winter I want to take snowboards and... [read more]

Window in France.