May
27
2023
Avid CNC ATC Post Processor for Fusion 360
If you are using an Automatic Tool Changer (ATC) with an Avid CNC then you have to customize or install a new post processor to make it work properly in Fusion 360.
UPDATE: the current Avid post processors work with a tool changer!
<Removed old stuff>
4. The free hobby version of Fusion 360 is limited for tool changes; you can only have one tool change per file. To have more than one tool change you will have to subscribe to Fusion 360.
5. When you Post Process a model, be sure to check “Use M6”. I also recommend turning on “G28 Safe Retracts”.
Next Post
