Borneman Timber Frame Layout Guide – 3D Printed (Free STL Download)

Woodworking

Download all the files for free over on Corbin’s Workshop: Borneman Layout Guide

I’ve been fascinated with timber framing for a few years. This is when you use lots of big pieces of wood, called timers, and traditional woodworking joinery, such as the mortise and tenon. It fell out of style a while ago, particularly in the United States when stick framing took off with relatively unskilled labor that could be used to make houses with smaller wood pieces, typically 2×4’s. You can get a lot more 2x4s out of a log compared to an 8×8.

You have to cut a lot of joinery, and a guy named Al Borneman made a cool little layout square to make it easier to layout some standard size cuts. It is called the “Borneman Layout Template” or “Big Al” or “Borneman Square”. I learned about it by reading Learn To Timber Frame by Will Beemer. I did some internet searching, and realized they were no longer available. Timber Frame HQ made an improved version but it is no longer available. It was also expensive…apparently around $180 – $200.

I decided to quickly make my own based on the pictures I saw in Learn to Timber Frame. I 3D printed it, and it worked out great! One of the hard part of 3D printing is getting overhangs; I decided to only print one side of the guide…and I could make another for the other half. So…a few bucks for this plastic jig, assuming you have a 3D printer. I’m sharing the file for free for others to print their own. A big thanks to Al Borneman!

Currently in the Fusion 360 file, I suppressed two “features” in the timeline; they are the opposite side of the lip; it is hard to print this feature, so I left it off. It would be awesome to print the whole thing at once, but I worry about the print failing or sagging on the bridges.



Subscribe
Notify of
guest


16 Comments
Inline Feedbacks
View all comments

[…] you have a 3D printer, then download the STL that I designed for a Borneman Layout Guide. These are really handy for laying out the lines and joinery. I’d love one in metal, but the […]

Tom

I got a quote for 3D printing for the V12.stl version with the overhang on both sides from Xometry. In solid ABS or similar material it would be $90.28 (includes shipping). Pricy but the original metal ones don’t seem to be available anywhere.

Boneman Layout Guide.JPG
Tom

I got one today from Xometry with the lip on both sides. They did say that there would be some small amount of shrinkage. If this image comes through does this it look right, the The full length is closer to 7.75 inches than 7.5

3-D printed.JPG
Tom

Can you send me the measurements from the edges to the grooves so I can check this

Tom

Ok, it does look ;perfect, now I need to start planning my next timber frame project. I remember this tool being very important in the class I took a few years ago.. Thank you again for supplying the file used for3-D printing.

Tom

I am wondering if you would be interested in making an stl for 3D production of a different template (picture attached) to lay out knee braces on 4 X 6 timber, layout a dovetail, and have a 8 by 2 opening to gauge tenons.
If so, please let me know if my diagram is clear. The angles on the knee brace are 45 degrees. The cross hatch areas are eliminated. The small triangle cross hatch on the long orientation is to establish the line used to cut the 3.5 inch tenon.. The 3/8 inch hold off on the other side is for housing.

knee brace template low res.JPG
Tom

Thanks, OK I’ll try that.

Tom

I used Fusion 360 (after viewing a couple of YOUTUBE videos) and designed a template for a dovetail and knee brace for 4″ x 6″ timbers and a 2″ x 8″ hole for gauging tenons. I sent it off to Xometry today and am hopeful that I end up with what I wanted. I appreciate you help with advice on how to do this.

Simeon

Tom, would you be so kind to share the file for the dovetail template? Can you email it to me? houseworkideas@gmail.com.
Thank you!

Simeon

Jim Rogers

The Big AL Borneman layout template is currently available, I sell them.

Subscribe to new posts:

You'll get an email whenever a I publish a new post to my blog and nothing more. -- Corbin

As an Amazon Associate I earn from qualifying purchases.

(c) 2008-2024 Corbin Dunn

Privacy Policy

Subscribe to RSS feeds for entries.

109 queries. 0.175 seconds.

Log in