The next big step in the kayak was to glue the top on. First you put a coat of unthickened epoxy on the bottom side of the top piece, and then use thickened (cab-o-sil) epoxy to glue it down to the top part. Using straps to secure it down in place helps form the curve while you nail it on. An action shot of me!

Flip it upside down so the glue drips into the gaps, and fill in the edge gaps (there were quite a few…): 

 The next day it was dry. I flipped it right side up and trimmed the edge off with my jigsaw before planning it level and adding a bevel:

Previous in Woodworking

Utility sink counter top: The Sculpin IPA Counter

Next in Woodworking

Woodworking: Jewelry Rack