My drilling/tapping jig to hold the wheel steady while I drill and tap the inserts:

I put a coat of paste wax on the inserts to make them slide easily:

All the pieces during painting:

Cooling rack after powder coating:

Skinned and un-skinned pieces together:

Detail on my air compressor setup for skinning:

I put tape over the other end holes, and block the tube with an insert I made:

Completed wheel, before LED’s:

Previous in Cyr Wheel

LED Cyr Wheel v3: Notes...on inserts

Next in Cyr Wheel

LED Cyr Wheel v3: Routed tubing..