I finished up the drawers. I used the Bessey clamps to keep things straight and tight, and also to pull close any gaps on the end:

After that, some still had some tiny gaps…I mixed some sawdust and glue together and filled them with that.

Then everything was sanded with 150 and 200 grit paper:

And the first coat of water based polyurethane:

I was having trouble getting it to spray to the thickness I wanted. I think I’ll let this first coat dry overnight and sand it down with 200 to knock off high spots.

Previous in Cyr Wheel

Bathroom Vanity: Taking Shape

Next in Cyr Wheel

Bathroom Vanity: Woodworking & Finishing Completed