I finished designing a custom PCB for my LED cyr wheel. It simply combines all the chips I use into one board. Ideally I would eliminate all of the other boards except the Teensy, but I’m not so good at SMD soldering yet.

I designed it in Eagle:

And I’ll be printing it with OSH Park based on advice from my friend Spencer.

This things should be awesome! It’ll be my first PCB, so i’m crossing my fingers that I did everything right.

Previous in General

SD Card errors with Arduino / Teensy 3.0

Next in General

Adafruit CC3000 + Webduino = Arduino Web Server over Wifi