Woodworking: Wedding Boxes

Woodworking

I recently went to the weddings of a few of my friends. Last weekend Tom and Nancy had a “Wedding Camp” celebration, and two weeks ago Andy and Irene got married in their barn. Both weddings were amazing and it was fun to be with some friends

In the pursuit of avoiding standard gifts, I decided to employ my woodworking skills and make them some boxes out of “nice” wood. Here’s some pictures of the building process.

I used cocobolo wood for the top; it is an exotic hardwood. I try to avoid exotic woods for obvious eco-reasons, but I just couldn’t help myself. The wood is beautiful, and I had seen it several times at the Global Woodsource store and just had to buy a piece. It is expensive, and I bought a small $60 piece.

IMG_0727.jpg

The bottom of the boxes is made out of an american wood — sycamore. When quartersawn, it has a beautiful speckled pattern. Best of all, it is a cheap wood, and $20 bought me a nice huge piece of wood.

Here’s a shot of the boxes in progress:

IMG_0703.jpg

After gluing them together, I used my newly built router table to route out some slots for keys:

IMG_0739.jpg

A few hours later, the keys were glued in and dried. I cut them off with a saw and sanded them smooth:

IMG_0741.jpg

Next the top was cut off the boxes using the table saw. I don’t cut them all the way through, and leave a tiny bit on (seen in the photo) that I cut through with a utility knife.

IMG_0746.jpg

After a bunch of sanding, I finished the boxes with a eco-friendly water-based finish (sprat on):

IMG_0787.jpg

The keys are actually centered from top to bottom, but it would have looked better if I centered them up to the chamfer on the top.

IMG_0797.jpg



Subscribe
Notify of
guest

4 Comments
Inline Feedbacks
View all comments
dad

did not see them – they look nice

dad

John C. Randolph

Corbin,

What kind of a saw is that in the fourth picture? Do the teeth go all the way around that curve?

-jcr

corbin

Hey John,
It’s actually a little hand saw. The teeth do go up around the curve, but not on the top of the blade. It is handy for doing really close cuts.
-corbin

Nick Hodges

Corbin —

Very nice — a beautiful handmade gift is the best kind of gift. Well done.

Nick

Subscribe to new posts:

You'll get an email whenever a I publish a new post to my blog and nothing more. -- Corbin

As an Amazon Associate I earn from qualifying purchases.

(c) 2008-2024 Corbin Dunn

Privacy Policy

Subscribe to RSS feeds for entries.

74 queries. 0.130 seconds.

Log in